
Sukabumi Green Stone Pool Tile
The pool tile that renders water a natural emerald green. Honed and bush hammered, calibrated for thin-bed installation below the waterline.
View Product
Sukabumi green stone, andesite and black lava pool tile with matching machined coping for luxury pools worldwide.
A pool tiled in natural stone reads fundamentally differently from one tiled in ceramic. The colour sits in the material rather than on it, so it deepens with water depth instead of staying flat, and it does not craze, fade or shift tone under years of UV and pool chemistry.
Three specifications cover almost every pool we supply. Sukabumi green stone for the emerald-green water that defines tropical resort architecture. Black lava for a dark-bottom pool that reads as a still reflective plane. Andesite for a grey, architectural pool that stays cool underfoot on the deck.
These three elements must come from the same material batch or the tone will step at the transition. We produce and ship them together as a matter of course.
10–15 mm below the waterline; 30–40 mm for coping, steps and any edge that takes load or impact.
Honed on walls and floors for the cleanest colour reading. Bush hammered on steps, benches, coping and any barefoot surface.
We produce the take-off — square metres of wetted area, linear metres of coping, corner pieces — with the quotation, rather than leaving you to estimate.

The pool tile that renders water a natural emerald green. Honed and bush hammered, calibrated for thin-bed installation below the waterline.
View Product
Machined coping in bullnose, half bullnose, drop-face and square edge, cut from the same batch as the pool tile so the tone runs continuously.
View Product
Grey andesite coping with high wet slip resistance — the cooler-underfoot alternative for high-sun markets.
View Product
Dark volcanic pool tile for dark-bottom pools — water reads as a still reflective plane rather than a coloured basin.
View Product
Hand-sorted river pebble set on mesh in natural, sliced or standing formats for shower floors, bathrooms, spa areas and feature walls.
View Product
A dense, low-porosity green stone quarried in Sukabumi, West Java. It is the material most specified for luxury swimming pools in tropical architecture because of the way it renders water a natural emerald green without any dye or pigment.
Material Details
A dense grey volcanic stone with high compressive strength and very consistent colour. The most widely specified Indonesian stone for paving, cladding, coping and high-traffic commercial surfaces.
Material Details
Indonesian basalt from the Java volcanic belt, quarried as a dense dark stone with fine natural porosity. Specified where architecture calls for depth, matte darkness and a surface that stays visually calm in strong sunlight.
Material DetailsSend drawings or a measured area and we will return an itemised take-off with a recommended material, thickness and finish for each position.